pdf_icon Download contentACCESS Manual as PDF

  1. Introduction to contentACCESS
    1. Services provided by contentACCESS
    2. Software requirements
  2. Installation of contentACCESS
  3. contentACCESS Tools
    1. Installing Virtual drive
    2. Installing the Proxy server (contentACCESSWS)
    3. Installing the Proxy web services
    4. Installing Outlook forms
    5. Legacy email archive connectors
    6. Legacy archive connector for Metalogix Archive Manager Exchange Edition (MAM EE)
    7. Legacy archive connector for Email Lifecycle Manager (ELM)
    8. Installing TECH-ARROW’s WinShortcutter
  4. contentACCESS Central Administration
    1. Central administration login
    2. contentACCESS Central Administration user interface
  5. Tenants in contentACCESS
    1. How to create a new tenant
    2. Tenant limitations
    3. How to provide access to a tenant (adding new tenant administrators)
    4. Tenant administrator invitation types
  6. General system configurations
    1. Connection
    2. User interface
    3. Users — role types, creating new users, adding user logins
    4. How to activate your license key
    5. How to create user logins to an already existing user?
    6. System administrators
    7. Login providers
    8. System
    9. Licensing
    10. Notifications
    11. Monitoring — how to find out possible misconfigurations / reasons of potential system/job failures
    12. Distributed environment in contentACCESS — Clusters
    13. Statistics
    14. How to create/configure databases — All databases
  7. Common features
    1. Databases
    2. Schedules
    3. Retentions
    4. Storages
    5. Exchange connections
    6. Importing contentACCESS configurations from files
  8. Creating new jobs in contentACCESS
  9. Jobs’ page, jobs’ context menu
  10. File Archive
    1. Introduction to File system archive
    2. File Archive settings
    3. File archive Databases
    4. File archive System settings
    5. File archive Retentions
    6. File archive Storages
    7. Root folders
    8. Aliases
    9. File archive Schedules
    10. Provisioning settings and managing access to contentWEB
    11. Configuring aliases
    12. Configuration of jobs available in contentACCESS File Archive
    13. Configuration of File system archive job
    14. Configuration of a File system restore job
    15. Configuration of File system recovery job
    16. Configuration of Remote shortcutting job
    17. Active/inactive documents in File system archive
  11. Email Archive
    1. Important settings before creating an Email Archive job
    2. Database settings
    3. Email archive System settings
    4. Provisioning settings
    5. Retention settings
    6. Shortcuts in email archiving
    7. Storing of archived emails
    8. Creating email archive schedulers
    9. User experience
    10. Exchange 2013: Mail app in OWA 2013 or on MS Outlook 2013 desktop version
    11. Exchange 2010: OWA 2010 integration
    12. Address book objects
    13. Granting access rights for mailbox users and explicit users to view the mailbox archive?
    14. Creating contentWEB users (option 1)
    15. Manage access to a mailbox archive (option 2)
    16. How the end user should log in to contentWEB (archive) over Internet?
    17. Database and store assignment in email archiving
    18. How to assign database and storage to an Exchange group?
    19. How to assign database and storage to a mailbox?
    20. How to move data from source database/storage into a second (target) database/storage?
    21. Creating Email archive jobs: archive, restore, recovery, mailbox move
    22. Email archive job
    23. Email restore job
    24. Email recovery job
    25. Mailbox move job
  12. Custom plugins
  13. Email management job configuration
  14. SharePoint archive plugin
  15. Storage replication plugin
  16. Sharing plugin
  17. Datengut plugin
  18. Email synchronizer plugin
  19. contentWEB
  20. officeGATE
  21. accessGATE Mobile
  22. Virtual drive
  23. Terms of use
  24. FAQ

10.15.Configuration of File system recovery job

File system recovery jobs are used to re-generate a file system from the archive back into the original file location. This processing type can be used in the following cases:

  • The entire folder structure has been deleted;
  • One or more folders have been deleted;
  • One or more documents from the folder(s) have been deleted and the user needs to get back these already archived documents from the archive.

The file system recovery is able to reconstruct the entire folder structure from the archive: the items which have been already archived will be put back into their source location. It will also create the folder if it was deleted from the folder structure. It is possible to recover any part of the structure:

  • One or multiple folders;
  • Recursive folder structure;
  • One or more folder contents.

The file system recovery job is checking for the duplicates, so the same recovery job can be run safely multiple times, duplicates will not be created:

  • If there is a shortcut for the recovered file in the folder – the file won’t be recovered;
  • If the file is already present in the folder – the file won’t be recovered;
  • If the same file is archived multiple times into the same folder – only the youngest file will be recovered.

The user has multiple options what to recover; it is possible to recover either the original file, or the shortcut. The recovery job can be also used, if the user archived the files with the “delete” method, and these files should be put back into the file system.

To create a recovery job, navigate to File Archive ⇒ Archive ⇒ Jobs control button, and click on +new. In the Add new job instance dialog, select File system recovery job from the dropdown list, select a node where the job should run from the Run on node dropdown list (if you would not like to specify a node here and the job should run on any available node, then select “Any available”), enter a Display name, and click on Add.

Documentation267

On the File system recovery job’s configuration page the user is required to set the following sections:

✓ Scheduling settings:
In this step the running times of the recovery job must be selected. It is possible either to select a scheduler from the list or to create a new scheduler via create new option. Recovery jobs are run only in specific cases. In most of the cases it is recommended to set a One time scheduler for the recovery job (e.g. with start date 7th of September at 6 PM), or to start the job manually from the status bar. (For more information about how to set schedulers refer to the section Schedules above.)

cACCESS 2.9 doc 186



✓ Processing settings:
There are two possibilities what to recover by the job: the user may recover either the original, or the shortcut. If the user selects the shortcutting option, it is also required to specify the Virtual drive server name. By using the “Use default” option the Virtual Drive that was already configured on the Virtual Drive configuration page will be automatically preselected. It is recommended to use this option, as if the settings have been changed on the Virtual Drive configuration page, the value will be automatically used by the job, too, without a need to change the job’s settings.

cACCESS 2.9 doc 187



✓ Folders to process:
In this section the user is required to specify one or multiple archive folder(s), or recursive folder structure(s) that were deleted and need to be recovered from the archive. There are multiple options how to add new source location(s) of which contents need to be recovered:

cACCESS 2.9 doc 188

  1. Via the + new option:

    Click + new. The Folder to process dialog will open. In our case the contents of the “invoices” folder (file path \\tanews\TECH-ARROW files to archive\invoices) was originally archived and deleted, and we need these documents receive back from the archive. First we select the Root file path from the dropdown list and enter the subfolder to the Relative path text box.

    cACCESS 2.9 doc 189
  2. It also possible to import the files to recover from a file, where the file path(s) are specified. To import this file, click the “import” button and follow the steps specified in chapter Importing contentACCESS configurations from files of this guide.

    Important!!! It is highly recommended to specify the file location as a path that can be accessed from anywhere. This is quite important also if the user has contentACCESS installed in a distributed environment (using multiple cluster nodes).



✓ Exclude folders
With this function you may set, which folders/subfolders should not be recovered. If you would not like to exclude any folder from the recovery process, you can skip these settings.

The folders may be excluded using one of the available methods: a) They may be added manually via the + new option; b) or may be imported in one of the available file formats via the import option.

cACCESS 2.9 doc 190

  1. Add exclude folders manually:
    Click on + new option. In the Exclude folder dialog’s textbox specify the folder(s) to be excluded. Use the hints that are featured in the same dialog.

    cACCESS 2.9 doc 191
  2. Import the list of exclude folders:
    Exclude folders may be imported as files in one of the available formats: CSV, XML, Tab delimited files or Space delimited file. The file to be imported must contain the list of folders. To import such a file with the list of folders refer to chapter Importing contentACCESS configurations from files of this guide.

✓ Modification date
The files can be recovered either with the original modification date, of with the recovery date. It is recommended to set the recovery date, if the folder is already processed by an archive job, and the user wants to prevent the folder from re-archiving.

cACCESS 2.9 doc 192



✓ Notification settings:
The user may select here, in which cases he needs to get notifications from the recovery job. It is possible to set here, that the notification emails will be sent only in case of errors or warnings, or they can be sent in all cases, too. Into the Recipient list textbox the user should insert the email addresses of the persons, to whom these emails should be sent. Notifications emails may be used as tools of the troubleshooting process.

Documentation274



✓ Resource settings:
The user may set a value here, which will determine how many items will be processed simultaneously by the recovery job.

Documentation275

Yes No Suggest edit
Help Guide Powered by Documentor
Suggest Edit